United-office ULG 300 A1 User Manual download pdf (Page 8)

- 5 -

Preparing for hot lamination

➩ Insert the foil guide rails

q

in the designated

holes on the rear of the laminator.

➩ Fold out the document supports

s

, so that the

documents can be pulled in straight into the slot

for manual foil feed

t

.

➩ Insert the plug of the laminator into a mains

power socket.

➩ Provide a firm location for the appliance.

➩ Set the selector switch for hot and cold lamina-

tion

i

to "HOT ".

➩ Set the foil thickness switch

o

to the desired

foil thickness (80 or 125 microns). The red

ON/OFF indicator lamp

u

will now glow.

The laminator heats itself up to its operating

temperature.

• As soon as the green indicator lamp "Ready"

y

glows, the laminator has reached its

operating temperature.

 Attainment of the operating temperature

is indicated by the lighting up of the green

LED indicator lamp "Ready"

y

. For a

more uniform laminating result we recom-

mend, especially for thinner foils (below

125 Micron) and after adjustment to a dif-

ferent foil thickness, to first wait an addi-

tional 2-3 minutes before beginning with

lamination.

➩ Lay the document to be laminated into a lami-

nating pouch of the appropriate size.

 Make certain that all corners of the docu-

ment have at least two millimetres of space

to the edge of the laminating pouch, as

shown in Fig. 1. Make certain that you use

only one pouch for laminating. First open

it up, as shown in Fig. 2.

 For further information about the lami-

nation process, please read the section

"Lamination process".

Fig. 2

Fig. 1

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 62 63

Comments to this Manuals

No comments