United-office 2-in-1 Paper Trimmer User Manual download pdf (Page 24)

22

Replacing the cutting head

Guarantee

If the blade of the slitter rewinder has

been damaged, the cutting head must be

replaced.

Remove the end cap of the guide 1.

rail from the base plate (Fig. 7, A) by

pushing it upwards at the lower end at

the same time as pushing it inwards

gently.

Turn the rotary knobs in such a way 2.

that the LOCK lettering is at the top.

Pull out the rotary knobs approx. 1 – 2

mm from the device. Turn the knobs by

about 30 degrees and now pull them out

completely. Pull out the guide rail from

the base plate (Fig. 7, B).

Remove the cutting head from the guide 3.

rail (Fig. 7, C).

Replace the old cutting head with a new 4.

one.

Slide the guide rail back in the base 5.

plate and install the new cutting head in

the process.

Turning them slightly, push the rotary 6.

knobs into the device again (LOCK

lettering at the top, the noses pointing

inwards). Place the end cap from above

on to the opening at the end of the guide

rail.

Note: Only the entire cutting head can

be replaced. To obtain a new cutting

head, please telephone our hotline.

Dear Customers,

we are pleased that you have chosen the

reversible guillotine / trimmer. Should a

technical problem arise with regard to the

equipment, please observe the following

points:

- The period of guarantee for the equipment

is 36 months.

- It is essential to keep the purchase receipt

and original packing.

- The ﬁrst line of action if a problem occurs

is to contact our hotline.

We are sorry for any inconvenience.

Yours faithfully

Olympia Business Systems

Vertriebs GmbH

Consumables

If the cutting head or blade becomes worn,

please contact the hotline. You will receive

a new cutting head from us together with

detailed illustrated instructions.

It is essential to retain this guarantee!

Hotline international

00800 100 22 100

GB/MT

71864_uof_2in1_papierschneidegeraet_content_lb5.indd 22 27.09.2011 08:40:59

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 30

Comments to this Manuals

No comments