United-office UAV 190 A1 User Manual Page 31

  • Download
  • Add to my manuals
  • Print
  • Page
    / 34
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 30
- 28 -
Place the Strip Cut Shredder attachment onto
a suitable container:
First place the broad end of the appliance on the
edge of the container. Then pull the telescope
arm 4 out sufficiently to ensure that this also
sits securely on the edge of the container.
Insert the plug into a mains power socket.
Operation
You can shred up to 6 sheets (80g/m
2
paper)
at the same time.
Attention:
Remove all staples and paper clips before feeding
paper into the cutter opening 2. Otherwise the ap-
pliance could be damaged.
Switching the appliance into the Auto mode:
Place the switch 1 for shredding into the position
"AUTO". The motor starts automatically and swit-
ches itself off automatically if no further paper is
in-serted.
Take note: Always guide smaller papers into
the middle of the cutter opening 2. The contact
which starts the cutting process is located there.
Clearing a material blockage:
Slide the switch 1 into the position "REV"
(Re-verse = reverse) should the paper to be
shredded jam.
The appliance now goes into reverse and the
paper to be shredded is returned.
Pull the paper to be shredded out of the applian-
ce and then place the switch 1 at "AUTO".
The appliance is now once again ready for ope-
ration.
Switching the appliance off:
To switch the device off, slide the switch 1 into
the "OFF" position.
If you do not intend to use the device for a long
period, disconnect the plug from the mains power
supply.
Notice regarding overheating of the appliance:
If it overheats, the appliance switches off automati-
cally.
Attention:
Remove the plug from the mains power socket to
avoid an unintended starting of the appliance.
Empty the container.
Allow the appliance to cool down.
Re-insert the plug into the mains power socket.
Switch the appliance on, in that the switch 1 is
placed into the position "AUTO".
Cleaning
Danger!
Always remove the power plug before cleaning the
appliance. There is a risk of receiving an electric
shock!
Warning!
The cutters in the appliance are very sharp! Injury
hazard!
Attention:
Do not spray oil or any other lubricants into the cut-
ter opening 2. These would irreparably damage
the appliance!
IB_96717_UAV190A1_LB1 20.02.2014 8:16 Uhr Seite 28
Page view 30
1 2 ... 26 27 28 29 30 31 32 33 34

Comments to this Manuals

No comments